Tuesday, May 27, 2008
Project 3-Domus, week 8
This week we came back with some research and ideas which are helpful to the project. We all decide that the best building material to go with is local timber, with iron sheet roofing. We start to throw ideas around regarding the floor plan, with basic sketches we slowly came to see some progress. I felt that the bedrooms should be seperated mainly due to the privacy and 'noises in the night', which can make the isolation of the place not so pleasent. This is something that is agreed with the group. We also want to have an open plan that incorporates the kitchen, lounge and work area which allows natural air movement, something that is important in this area. We are still unsure on which is the best way to store water or to create energy required for the house. We are still unsure what facade type we should go with, although it probably would be something appropiate for the site.
Project 3- Domus, Week 7
This week was an introduction to the other people in the group, mainly throwing up ideas as to how to go about this project. We did some research of the site and how to best understand the conditions and environment of Kakadu. Gary found out the exact location of the site, which isn't in Kakadu National Park but located about 80km south of Darwin and about 10km off the Stuart Hwy. It appears to be located at the foot of a mountain range which is located to the east of the site. Something we could incorporate to the design of the project. We all agreed to go away and do some more research regarding materials, design, and climate so we can take the next step next week.
Monday, May 26, 2008
Project 2- Minima, Presentation




Overall, I am very happy with what I had come up with. I decided it would be an area which would be suitable to be located indoors or outdoors with a fully waterproof roof.
The facade i got the inspiration from the art style 'de stijl' with geometric forms and use of basic colours on a white background. Traditionally 'de stijl' has the three primary colours along with the black lines and white background, but in this case I decided to only use red and dark grey which I feel works very well together and don't counteract eachother.
The form also accomodates to this where a basic 3mx3m box has been used for the floor plan. The floor plan incorporates all the requirements and after the discussion from last week I decided to include a bed that raises to the ceiling on a sliding track and a couch is located underneath this. This bed/couch also has storage beneath which is openable by removing the couch cushions and lifting up the cover. The kitchen bench and cupboard is also moveable on a sliding track which slides into the shower area through an opening (which when closed is waterproof though a properly fitted rubber seal), this then allows more desk space (which is allowed with a folding bench). There is also storage above the kitchen bench, the toilet also has storage above it as well. I decided not to enclose the shower and toilet with doors, mainly due to the fact that one person would be living in there and privacy won't really be an issue. Also i've included a rainwater tank above the shower, it would be custom built to fit the area. A casement sliding door has also been included for the front door with windows (which would be custom made) incorporated into the facade.
Project 2- Minima, week 4
From last week I decided to use the structural idea of the sticks and have 90x90 posts supporting the dwelling 300mm off the ground. I'm still thinking of the facade where i want to incorporate the posts, although I think it would be best for it to be in a geometric style. The floor plan is becoming more harder than I thought. After having discussions with someone who had taken over Michael for the day (I'm unsure who she was) where she in a way challenged me to do more in the way to making it work. Thus allowing more room for movement and storage. It was good to get that perspective and something I will take on board.
Project 2-Minima, week 3
I wanted to try and figure out what to implement in this project. Michael noted on the Tablinum project I should of used the stick facade as a structural aspect, so this is something I would like to implement. Mainly I would want this to be functional in a floor plan, where it would be easy to move around but not be overly huge in size. It would be best for the shower, toilet and sink be in close proximity to eachother for plumbing issues.
Project 1

With this design I wanted to make it minimalistic but mainly make it functional. I chose to make the concrete blockwork extend outwards for an image that makes more appealing. The idea with the facade was inspired from the game "pick up sticks" a game where you take one stick away from the others, trying not to move the others. These sticks came from what was left over from what was made to create the desk. There would be enough light into the dwelling given that there is no roof as well as openings in the door and window. The design is located on the 3rd floor located outside the library, this place seemed the most logical due to the minimal traffic (in relation to the rest of the building) as well it is the best area in terms of light.
Subscribe to:
Posts (Atom)